By: LuoDengYu

What Is the Upper Grille Molding — and Where Does It Sit?

The upper grille molding is the horizontal trim strip that spans the gap between the leading edge of your hood and the top of the grille opening. It is not the grille insert bars, not the hood bulge panel, and not the front bumper. Think of it as a narrow band that bridges the hood and grille mesh, running the full width of the front end between the headlights.

This is a styling accent overlay, not a full grille replacement and not a performance part. It sits over (or in place of) the factory upper molding band to change its color or finish. Why does that matter? Because some factory Sierra 1500 configurations ship with a contrasting upper molding that clashes with an otherwise blacked-out front end. One verified customer on the NINTE product page put it plainly: their 2024 GMC Sierra 1500 came from the factory almost completely blacked-out, except for an "annoying white nose cap" between the black grille and the front of the hood.

The NINTE Front Grille Upper Molding Trim for 2022–2026 GMC Sierra 1500 is the product this guide covers. At $187.99 for the gloss black variant, it sits in the mid-range of the aftermarket category. This guide covers only the Sierra 1500. Do not extend these fitment claims to the Sierra HD, Sierra EV, or any other GMC model.

2022–2026 GMC Sierra 1500 Fitment: What You Must Confirm Before Ordering

The Critical 2022 Model-Year Split

If you own a 2022 Sierra 1500, pay close attention. GMC produced two distinct body styles that year: the "2022 Limited" (RPO code J21), which carries over the 2019–2021 front-end design, and the "Refreshed 2022" (RPO code J22), which introduced a completely new front fascia, grille, and headlights. These are mechanically different front ends, and parts are not interchangeable between them.

Here is how to tell which one you have: check the 12th digit of your VIN. A digit of "5" or higher indicates the Refreshed 2022 (New Style) body. A digit of "4" or lower indicates the Limited (pre-refresh) body. The NINTE upper grille molding trim is designed for the Refreshed body style, as confirmed by Go-Parts.

2023–2026 Fitment

The 2023, 2024, 2025, and 2026 Sierra 1500 models all share the refreshed front-end architecture that GM Authority documented when production dates were first announced. These model years fall within the confirmed fitment range. However, some NINTE SKUs on Amazon and older listings cover only 2022–2024 or 2022–2025. Always verify the exact SKU's confirmed year range on the current ninteshop.com listing before purchasing.

Trim Level Compatibility

For 2025 and 2026, the Sierra 1500 is offered in eight trim levels, each with a distinct grille design and finish. According to GM Authority's grille comparison, the upper grille header varies by trim:

  • Pro: Chrome header
  • SLE: Chrome header
  • Elevation: Body-color header
  • SLT: Chrome header
  • AT4: Gloss black header
  • AT4X: Varies
  • Denali: Chrome header with signature Denali grille insert
  • Denali Ultimate: Chrome header with exclusive Vader Chrome grille

Denali and Denali Ultimate trims feature premium, distinctive chrome grilles that may not be compatible with a standard upper molding overlay designed for base and mid-level trims. If you own either of these trims, contact NINTE fitment support before purchasing. The Denali Ultimate's exclusive Vader Chrome design, noted by Fairway GMC, is particularly unique.

OEM Cross-Reference

OEM part numbers 84686648 and 84774163 can be used as cross-reference tools with your dealer's parts catalog to confirm the factory component this trim is designed to overlay. If any doubt remains, reach out to NINTE's fitment support before ordering rather than after.

Material, Finish, and What's in the Box

The NINTE upper grille molding trim is constructed from ABS plastic, consistent with NINTE's broader Sierra 1500 grille trim line. ABS is the dominant material in the U.S. automotive exterior trim market, representing an estimated 45–55% of market value according to IndexBox. It is favored for its design flexibility, low weight, and cost efficiency.

The primary listed variant is gloss black. A chrome finish variant has appeared on related NINTE product pages, so buyers should verify current finish options on the ninteshop.com listing at time of purchase.

The product is a molding overlay that installs over the factory upper grille band. For exact package contents (number of pieces, any included adhesive tape or hardware), confirm these details on the current product listing. This guide does not assume or invent hardware or accessory claims that are not verified on the listing.

If you want to cover the hood bulge area above the grille opening as well, the NINTE Upper Grille Hood Bulge Cover for 2022–2026 GMC Sierra 1500 (Gloss Black, No Logo) is a related but distinct product. It is also a non-replacement overlay and pairs naturally with the upper molding trim for a more complete front-end blackout look.

Installation Overview: Tape-On Application and Surface Prep

Based on verified NINTE product descriptions for the 2022–2025 Sierra 1500 upper grille molding overlay variant, the attachment method is tape-on (adhesive-based, non-drilling). Before starting installation, confirm the attachment method for your specific SKU on the current listing, as variants may differ.

For any adhesive exterior trim installation, proper surface preparation is essential:

  1. Wash and dry the factory upper molding thoroughly to remove dirt, road film, and wax residue.
  2. Degrease the bonding surface with isopropyl alcohol (90% or higher concentration works best).
  3. Allow the surface to dry completely before proceeding.
  4. Ensure the ambient temperature is within the adhesive manufacturer's recommended range. Most automotive adhesive tapes bond best between 60°F and 90°F.

Dry-fit the trim before removing any adhesive backing. Hold it in position to confirm alignment and coverage across the full width of the upper molding band. This step takes a minute and can save you from a crooked install.

No drilling, cutting, or modification of the factory grille or hood is implied by the overlay design. If your specific configuration requires any modification, contact NINTE support before proceeding. This trim is intended for the Refreshed 2022 or newer Sierra 1500. Attempting to fit it on a 2022 Limited front end is likely to result in poor fitment or visible gaps.

Chrome Delete and Blackout Styling: Why Sierra 1500 Owners Are Buying This Trim

The chrome delete trend is the primary purchase driver for this product. Pro, SLE, and SLT trims all ship with chrome upper grille headers, and many owners want a monochromatic gloss black front end that matches the Elevation or AT4 aesthetic. A full grille swap or repaint is expensive and time-consuming. An overlay under $200 that requires no drilling solves the problem directly.

The numbers back up the trend. Gloss black and matte black trim segments are growing at 8–10% annually, according to IndexBox's decorative exterior trim market analysis. Meanwhile, chrome-plated plastic, still the largest single finish segment at roughly 35–40% of market value, is declining by 1–2 percentage points each year. Grilles account for an estimated 22% of total automotive decorative exterior trim market revenue in 2025, according to Future Market Insights.

At $187.99, the NINTE trim sits above unbranded eBay and Amazon alternatives (typically $65–$135) but offers NINTE's quality control, U.S. warehouse shipping, and a 30-day return window. For buyers who value fitment support and consistent finish quality, that price difference buys real peace of mind.

If you own a 2019–2022 (pre-refresh) Sierra 1500 and want a similar front-end upgrade, the NINTE Grille Covers for 2019–2022 GMC Sierra 1500 SLT AT4 (Front Mesh Grill Cover Overlay Trim) covers that earlier body style as a separate SKU.

One note for Elevation trim owners: the body-color header on your truck means the gloss black overlay may create a visible contrast or color mismatch depending on your paint color. Verify compatibility with NINTE before ordering.

Caring for Your Gloss Black ABS Trim

Gloss black finishes look sharp, but they show every scratch and swirl mark. Use only pH-neutral, non-abrasive car wash soap and a soft microfiber cloth on the ABS surface. Avoid abrasive compounds, harsh degreasers, or stiff brushes that can scratch or dull the finish.

Apply a UV-protective plastic trim sealant or spray detailer formulated for gloss black exterior plastics every few months. UV exposure is the biggest long-term threat to ABS trim, causing fading, chalking, or hazing. A good sealant adds a protective layer that extends the life of the finish significantly.

For minor surface scratches, a gloss black plastic touch-up pen or a light application of plastic polish designed for ABS can reduce visibility. Do not use paint touch-up products intended for metal surfaces, as they can react differently with plastic.

Avoid directing high-pressure water directly at the adhesive seam edges during washing. Concentrated pressure can weaken the bond over time. Rinse gently around the trim perimeter instead. Inspect the adhesive bond at each wash, especially during the first 30 days, and press any lifting edges back firmly. If adhesion fails within the warranty period, contact NINTE at info@ninteshop.com.

Shipping, Pricing, and Returns: What to Expect

The verified price is $187.99 for the gloss black variant on ninteshop.com at time of writing. Check the current listing for any pricing updates or additional finish variants.

NINTE offers free shipping to the 48 contiguous U.S. states. Hawaii, Alaska, U.S. Virgin Islands, and Puerto Rico may incur additional shipping costs.

Orders may ship from NINTE's U.S. domestic warehouses (NJ or CA) or from overseas depending on stock availability, as confirmed by third-party shipping reviews. Delivery timelines will vary accordingly. Check the current shipping policy page on ninteshop.com for estimated transit times.

For returns, contact info@ninteshop.com within 30 days of delivery for non-defective returns. The buyer covers return shipping, and a 20% restocking fee applies. For damaged or defective items, contact within 72 hours of delivery with photos. Full terms are available on the NINTE returns policy page.

NINTE has been trusted since 2016 with over 1,600 customer reviews. A rewards program is also available for verified reviewers, so your feedback can earn you something back on future purchases.

Pre-Purchase Fitment Checklist

Before you order, walk through these six steps:

  1. Confirm model year and body style. If you own a 2022 Sierra 1500, check the 12th digit of your VIN. A digit of "5" or higher means you have the Refreshed body (compatible). A digit of "4" or lower means you have the 2022 Limited, which uses a different front end.
  2. Confirm your trim level. Identify whether your Sierra is a Pro, SLE, Elevation, SLT, AT4, AT4X, Denali, or Denali Ultimate. Denali and Denali Ultimate owners should contact NINTE fitment support before ordering.
  3. Identify your factory upper grille header finish. Is it chrome, body-color, or gloss black? This determines whether the gloss black overlay will blend smoothly or create a visible contrast.
  4. Cross-reference OEM part numbers. Use part numbers 84686648 or 84774163 with your dealer's parts catalog to confirm the factory component this trim is designed to overlay.
  5. Verify the current SKU on ninteshop.com. Confirm it covers your exact model year. Variant listings on Amazon and older pages may show a narrower year range (2022–2024 or 2022–2025).
  6. Contact NINTE fitment support if any doubt remains. Returns on non-defective parts require buyer-paid return shipping and a 20% restocking fee. Confirming fitment upfront saves both time and cost.

If your truck falls outside the 2022–2026 fitment range, NINTE offers overlay options for earlier generations. The NINTE Mesh-Style Front Grille Overlay for 2016–2018 GMC Sierra 1500 SLT serves an earlier Sierra generation with a similar overlay approach.

Frequently Asked Questions

Is this a full grille replacement?

No. The NINTE upper grille molding trim is a styling overlay that covers the horizontal band between the hood and the grille opening. The factory grille insert bars remain in place.

Will this fit my 2022 GMC Sierra 1500?

Only if it is the Refreshed 2022 body style (RPO J22). Check the 12th digit of your VIN. If it is "5" or higher, you have the compatible body style. If it is "4" or lower, you have the 2022 Limited, which uses a different front end.

Does it fit the Denali or Denali Ultimate?

These trims have signature chrome grilles that may not be compatible with this overlay. Contact NINTE fitment support to confirm before ordering.

Does installation require drilling?

Based on verified NINTE product descriptions, the overlay uses a tape-on adhesive attachment method. Confirm the attachment method for your specific SKU on the current ninteshop.com listing before beginning installation.

What if my part arrives damaged?

Contact NINTE at info@ninteshop.com within 72 hours of delivery with photos of the damage. For non-defective returns, contact within 30 days. The buyer covers return shipping, and a 20% restocking fee applies.

I want to black out more of my Sierra's front end. What else does NINTE offer?

The NINTE Upper Grille Hood Bulge Cover for 2022–2026 GMC Sierra 1500 pairs well with the upper molding trim for a more complete blackout. For a broader exterior refresh, the NINTE GMC collection includes additional exterior pieces for various Sierra model years.

Final Thoughts: Is the NINTE Upper Grille Molding Trim Right for Your Sierra?

This trim solves a specific, common problem: a contrasting factory upper molding that breaks up an otherwise blacked-out Sierra 1500 front end. It is a targeted, affordable gloss black accent that does exactly what it promises, nothing more and nothing less.

The most important step before purchasing is fitment confirmation. If you own a 2022 model, check that 12th VIN digit. If you drive a Denali or Denali Ultimate, contact NINTE before ordering. These two steps alone will prevent the majority of fitment issues.

At $187.99 with free U.S. shipping and a 30-day return window, the NINTE trim offers a meaningful upgrade over unbranded alternatives for buyers who value quality control and real fitment support. Use the pre-purchase checklist in this guide, verify your SKU on the current ninteshop.com listing, and reach out to NINTE's fitment team if any compatibility question remains.

Ready to check it out? Head to the NINTE Front Grille Upper Molding Trim product page for current pricing, finish options, and fitment details.

Sources

Leave a comment

Please note, comments must be approved before they are published

Your cart

Language
English
Open drop down